Cylinders


To purchase, or for more information

 

High Speed Through-Hole

Oil operated actuating cylinders with through-hole

  • All ATS cylinders have proper internal pilot operated check valves to work with the ATS in process High-Low control system
  • All ATS cylinders have proportional open and close piston areas to work with ATS in process High-Low control system for OD chucking
  • ATS cylinders have longer piston strokes to provide longer Ultimate Chuck jaw strokes required for proper use of hard top jaws
  • Select the ATS cylinder for your Ultimate Chuck that will give you the grip force required for your application:
    • Maximum grip force for heavy work
    • Controlled light grip force for fragile parts
  • Please contact us to assist you in selecting the proper cylinder and Ultimate Chuck for your application.

static1.squarespace-1.jpg

To purchase, or for more information

 

High Speed Non Through-Hole

Oil operated actuating cylinders without through-hole

  • All ATS cylinders have proper internal pilot operated check valves to work with the ATS in process High-Low control system
  • All ATS cylinders have proportional open and close piston areas to work with ATS in process High-Low control system for OD chucking
  • ATS cylinders have longer piston strokes to provide longer Ultimate Check jaw strokes required for proper use of hard top jaws
  • Select the ATS cylinder for your Ultimate Chuck that will give you the grip force required for your application:
    • Maximum grip force for heavy work
    • Controlled light grip force for fragile parts
  • Please contact us to assist you in selecting the proper cylinder and Ultimate Chuck for your application.

To purchase, or for more information

 

High-Low Hydraulic and Electric System

  • High-Low Control System
    • Control Box
    • Solenoid Valves
    • Hose and Fitting Kit
    • Stand
    • Pressure Gauge
    • Accumulator
  • High-Low Advantage
    • Two different grip-forces in one automatic machining cycle
    • Clamp at high grip force for roughing with full horsepower cuts
    • Drop to low grip force (50%) automatically via M-code for less workpiece distortion during finish cuts
    • Chuck does not open and workpiece is not released during drop to low grip force

Cylinders Dimensional Drawings

High Speed Through Hole Cylinders
Cylinder
Model*
Max. Pull @ 570 PSI Piston Stroke Max. RPM For UC2 Model
OVS 85 4,500 lbs 1.25” 8000 170
OVS 150 14,750 lbs. 1.77” 5500 210
OVS 200 26,400 lbs. 1.96” 4500 315
High Speed Through Hole Cylinders
Cylinder
Model*
Thru
Hole
Max. Pull @ 570 PSI Piston
Stroke
Max
RPM
For UC2
Model
SZS-E 67-156 2.63" 13,790 lbs. 1.38” 5500 210 - 265
SZS-E 90-223 3.54" 19,220 lbs. 1.38” 4000 265 - 315

*All OVS and SZS-E models except the OVS 85 are capable of in-process high-low chucking OD gripping only (Can ID grip, but not high-low.) All cylinders include stroke control switches and coolant collector.

 

High Low Control System:

  • Control Box
  • Solenoid Valves
  • Hose and Fitting Kit
  • Stand
  • Pressure Gage
  • Accumulator

High Low Advantage:

  • Two different grip-forces in one machining cycle
  • Work-piece is not released between pressure changes
  • Clamp at high pressure for full horse power cuts
  • Automatically reduce to low pressure to relax part for finishing
  • Done via M-Code without operator intervention

Note: For the above system, contact ATS Systems for additional costs if your machine does not have the required existing hydraulic cylinder control system or inhibit interface.